Series DCT1000DC Dust Collector Timer Controller -

Series DCT1000DC Dust Collector Timer Controller

P/N#: DCT1000, DCT1010-DCP200A, DCT1022-DCP200A, DCT1010DC-DCP200A, DCT1022-DCP200A

Origin:

Simplify your on-demand cleaning requirements with the Series DCT1000DC Dust Collector Timer Controller. Relying on one timer board for on demand and continuous cleaning applications, the DCT1000DC eliminates external devices such as pressure switches, relays and timers.

Request a quote

Contact

Simplify your on-demand cleaning requirements with the Series DCT1000DC Dust Collector Timer Controller. Relying on one timer board for on demand and continuous cleaning applications, the DCT1000DC eliminates external devices such as pressure switches, relays and timers.

The DCT1000DC accepts 10-30 VDC power. The units modular design allows for use as a continuous cleaning control or on demand cleaning control using the optional DCP plug-in pressure module. A 4-20 mA process output is integral to the DCP pressure module, eliminating the need to purchase an expensive process transmitter. A solenoid fault light on the DCT1000DC notifies the operator when a solenoid valve fails to activate properly.

The DCT1000DC is the same size for 6, 10 and 22 channels. One board size allows the standardization on one enclosure.

Product Applications

Dust collection
Pneumatic conveying

DCT1000DC TIMER CONTROLLER:
Output Channels:: 6, 10 & 22 channels.
Power Requirements:: 10-30 VDC.
Power Consumption:: 5 W.
Solenoid Supply:: 3A maximum per channel.
Fuse:: 3 A @ 250 VAC.
Temperature Limits:: -40 to 140°F (-40 to 60°C).
Storage Temperature Limits:: -40 to 176°F (-40 to 80°C).
On-time:: 10 msec to 600 msec, 10 msec steps.
On-time Accuracy:: ±10 msec.
Off-time:: 1 second to 255 seconds, 1 second steps.
Off-time Accuracy:: ±1% of the value or ±50 msec, whichever is greater.
Weight:: 1 lb, 3.0 oz (538.6 g).
Agency Approvals:: CE.
DCP PRESSURE MODULE:
Pressure Ranges:: 10" w.c. or 20" w.c.
Temperature Limits:: -40 to 140°F (-40 to 60°C).
Pressure Limits:: 10 psi (68.95 kPa).
Pressure Limits (differential):: 10 psi (68.95 kPa).
Accuracy:: ±1.5% F.S. @ 73°F (22.8°C).
Output Signal:: 4-20 mA.
Alarm Contacts:: 1.5A inductive load, 3A resistive load @ 30 VAC or 40 VDC.
Process Connections:: Two barbed connections for use with 1/8" (3.18 mm) or 3/16" (4.76 mm) I.D. tubing.
Weight:: 5.5 oz (155.9 g).

Other products

P/N#: AT-ADPS

1128

Series AT-ADPS ATEX/IECEX Approved Differential Pressure Switch

The Series AT-ADPS ATEX/IECEx Approved Differential Pressure Switch is designed for pressure, vacuum, and differential pressure applications in hazardous areas. The dual scaled adjustment knob in inches water column and Pascals allows changes to the switching pressure to be made without a pressure gage. The switch is available with settings from 0.08 in w.c. (20 Pa) up to 20 in w.c. (5000 Pa). The silicone diaphragm makes this series ideal for use with air and other noncombustible gases. Flame-proof enclosures are available in aluminum and can include a glass window for viewing set point status on the adjustment knob.

P/N#: ADPS/EDPS

1196

Series ADPS/EDPS Differential Pressure Switch

The Series ADPS/EDPS Adjustable Differential Pressure Switch is designed for pressure, vacuum, and differential pressures. The dual scaled adjustment knob in inches water column and pascals allows changes to the switching pressure to be made without a pressure gage. The ADPS/EDPS is available with settings from 0.08 in w.c. (20 Pa) up to 20 in w.c. (5000 Pa). The silicone diaphragm and PA 6.6 body make the series ADPS ideal for use with air and other noncombustible gases. Series EDPS models meet UL508 and are constructed of plenum rated plastics. The compact size, adjustment knob and low cost make the ADPS/EDPS the perfect choice for HVAC applications.