HTH TECHNOLOGY CO., LTD, Công Ty TNHH Thương mại Dịch Vụ Công Nghệ HTH

HTH TECHNOLOGY CO., LTD, Công Ty TNHH Thương mại Dịch Vụ Công Nghệ HTH

Meter for Volume at Base Conditions TEC 24

Views: 1647

P/N#: TEC24DN080G-DA11-1- AB2A-AB-A-0-00-A2,A3

Origin:

The TEC 24 meter for volume at base conditions is a fl owmeter which directly measures the fl ow rate of gases at measurement conditions and calculates the volume at base conditions via temperature and measured pressure value. The fl ow rate and the volumes at measurement and base conditions can be displayed on the electronic totalizer.

Request a quote

Contact

Features • Low-torque metering system with long-term stability Apart from the turbine wheel, there are no mechanically actuated parts. • Battery-powered or mains-powered operation The standard design of the TEC 24 is powered by two lithium cells. In normal operating mode, the batteries have a service life of a minimum of six years and can be changed without opening the case. • Explosion protection The TEC 24 is intrinsically safe and can be used in zone 1. • Calculation of the K coeffi cient The volume corrector of the TEC 24 calculates the K coeffi cient in conformity with GERG 88S or AGA 8 gross method 1. • Two pulse outputs HF (Vm) and LF (Vm or Vb) • Flow display (HF sensor) The current fl ow value and the maximum value are displayed. • Digital interface A serial RS 485 interface with Modbus protocol is available for exchanging data. • 4-20 mA current output (transmitter) For designs with a current output board (an external power supply unit is required for devices located in areas subject to explosion hazards). • Remote totalizer (option)

 

 

Other products

HTH TECHNOLOGY CO., LTD, Công Ty TNHH Thương mại Dịch Vụ Công Nghệ HTH

HTH TECHNOLOGY CO., LTD, Công Ty TNHH Thương mại Dịch Vụ Công Nghệ HTH

HTH TECHNOLOGY CO., LTD, Công Ty TNHH Thương mại Dịch Vụ Công Nghệ HTH
8:00 am - 5:00 pm
chat facebook