Infrared Open Path Gas Detector - SafEye Quasar 900 -

Infrared Open Path Gas Detector - SafEye Quasar 900

P/N#: Quasar 900 - QT-C111 QR-C111

Origin: USA

Quasar 900 is totally immune to interference from sunlight or any other sources of radiation such as flare stacks, arc welding or lightning.

The high power xenon lamp will compensate for changing weather conditions, including rain, fog, mist, snow and makes it immune to influences from solar radiation, arc-welding, stack flares or vibration from machinery.

Quasar 900 is approved to SIL2 (IEC61508), equipped with heated optics and tolerates a very wide temperature range to provide reliable detection.

No unrevealed failures. In normal operation, the output signal is 4 to 20 mA, depending on the measured gas concentration.

Sub-4mA signals includes indications for beam blockage (2mA), a fault (1mA) In addition

Request a quote

Contact

Other products

P/N#: FLS-FSIM

885

Flame Simulator - FlameSpec FLS-FSIM

Suitable for use in hazardous areas, the FlameSpec simulators are inexpensive, modern ergonomic design, with alignment markers, allows accurate, fast and convenient detector.

Detection within 40 milliseconds of fireballs or explosions
Can be used at distances of up to 23.0 feet (7.0 meters) from the detector.

P/N#: FLS-IR3-H2-XXX

1056

Hydrogen Flame Detector IR3 - FlameSpec-IR3-H2

The unmatched detection times and distances are:

Detection within 40 milliseconds of fireballs or explosions
1.5s for 32″ (0.8m) hydrogen fire at 0–66 ft. (0–20m)
4s for 32″ (0.8m) hydrogen fire at 66–100 ft. (20–30m)

P/N#: FLS-IR3-H2-HD-XXX

863

Visual Hydrogen Flame Detector IR3 - FlameSpec-IR3-H2-HD

The unmatched detection times and distances are:

Detection within 40 milliseconds of fireballs or explosions
1.5s for 32″ (0.8m) hydrogen fire at 0–66 ft. (0–20m)
4s for 32″ (0.8m) hydrogen fire at 66–100 ft. (20–30m)

P/N#: FLS-UV-IR-XXX

711

UV/IR Flame Detector - FlameSpec-UV-IR

The detector addresses slow growing fires as well as fast eruptions of fire using improved UV IR
technology. The detector operates in all weather and light conditions.

FlameSpec-UV-IR-F model - Same As FlameSpec-UV-IR but does not see hydroxyl and hydrogen fires and IR sensor that operates at a wavelength of 4.0-5-0 μm

P/N#: FLS-UV-IR-HD-XXX

1231

Visual UV/IR Flame Detector - FlameSpec-UV-IR-HD

FlameSpec-UV-IR-F-HD model - Same As FlameSpec-UV-IR-HD but does not see hydroxyl and hydrogen fires and IR sensor that operates at a wavelength of 4.0-5-0 μm

In addition, the detector provides high-definition (HD) video output of the monitored area with clear imaging of a fire event and of personnel at distances up to 100 ft (30m).

P/N#: FLS-IR3-HD-XX

908

Visual Flame Detector FlameSpec-IR3-HD

The unmatched detection times and distances are:

40ms – for a fast fire burst or explosion
1.2s – for 1ft² (0.1m²) n-heptane pan fire at up to 50 ft. (15m)
<4.1s – for 1ft² (0.1m²) n-heptane pan fire at up to 230 ft. (70m)

Integral HD quality video, with event recording, on top of the proven, superior capabilities of Triple IR (IR3) flame detection, provides a very powerful safety tool to protect personnel, plants, and processes

HTH TECHNOLOGY CO., LTD, Công Ty TNHH Thương mại Dịch Vụ Công Nghệ HTH

HTH TECHNOLOGY CO., LTD, Công Ty TNHH Thương mại Dịch Vụ Công Nghệ HTH

HTH TECHNOLOGY CO., LTD, Công Ty TNHH Thương mại Dịch Vụ Công Nghệ HTH

HTH TECHNOLOGY CO., LTD, Công Ty TNHH Thương mại Dịch Vụ Công Nghệ HTH

HTH TECHNOLOGY CO., LTD, Công Ty TNHH Thương mại Dịch Vụ Công Nghệ HTH

8:00 am - 5:00 pm