HTH TECHNOLOGY CO., LTD, Công Ty TNHH Thương mại Dịch Vụ Công Nghệ HTH

HTH TECHNOLOGY CO., LTD, Công Ty TNHH Thương mại Dịch Vụ Công Nghệ HTH

Differential Pressure Flowmeter DPE-S-PT

Differential Pressure Flowmeter DPE-S-PT

Views: 1869

P/N#: DPE-S-PT

Origin:

DPE-S-PT is a differential pressure flow meter which can check the momentary flow rate and the integrated flow rate at the site using differential pressure transmitter installed into the orifice body. Able to transmit the flow rate signal to the outside for checking, it can be controlled while interlocked with several peripheral devices

Request a quote

Contact

DPE-S-PT is a differential pressure flow meter which can check the momentary flow rate and the integrated flow rate at the site using differential pressure transmitter installed into the orifice body. Able to transmit the flow rate signal to the outside for checking, it can be controlled while interlocked with several peripheral devices.

This product can be applied to almost all industrial sites including chemicals, oil and gas, power plants, metal processing, etc. Also, it can keep a high accuracy at a site where the temperature and pressure inside the piping is not constant, for the temperature and pressure is automatically compensated.

This product can be applied to almost all industrial sites including chemicals, oil and gas, power plants, metal processing, etc. Also, it can keep a high accuracy at a site where the temperature and pressure inside the piping is not constant, for the temperature and pressure is automatically compensated.

Other products

P/N#: GSA-500-MT

1371

GSA-500 Ultrasonic Flowmeter

GSA-500 ultrasonic flow meter for liquids having an ultrasound sensor mounted outside the piping, is a highly precise measuring instrument with a high accuracy and a high reproducibility. It is applicable to a wide range of piping diameter from 15A to 6000A and suitable to control and apply depending on user environment based on special design enabling at the site to not only inspect and indicate integrating flow measured but also output various kinds of signals outward

P/N#: KMSG-8000MT

974

Thermal Mass Flowmeter KMSG-8000MT

KMSG-8000MT is a thermal mass flow meter specially designed for measuring flow rate in processes using gas as fluid. Flow meter with top-notch technology integrated is suitable for use in the field where especially high accuracy and varied self-diagnosis is required.

P/N#: KMSG-8000MI

1146

Thermal Mass Flow Meter KMSG-8000MI

KMSG-8000MI is so designed that it can be applied/used onto existing piping regardless of the pipe size. The product does not need any additional piping design for convenience in use, does not have any driving part, and causes a small pressure loss.

1031

Vortex Flow Meter KTVP-750

KTVP-750 is a flow meter of eddy-current type with a temperature and a pressure sensor built in. With a temperature and pressure compensating function integrated in flow measuring mechanism in the same body, it can be applied to an environment with the piping in a floating condition in various industrial sites.

1367

SMGP Series - Meta Tube RotaMeter

SMGP Series is a metal tube area flow meter which is made of metal at all areas contacting the fluid and can measure varied fluids including opaque liquids and gases at a very low flow rate and indicate the results and which can be applied to high temperature and pressure fluids.

P/N#: KTR-550-F-F

2353

Turbine Flow Meter

KTR-550-F-F is a turbine flow meter having a mechanical section combined with electronic board displaying the flow rate, the end connection of which is finished with a flange. Because its driving part is mechanical, it can be applied for all fluids of low temperature to high temperature with relatively high accuracy and excellent reproducibility

HTH TECHNOLOGY CO., LTD, Công Ty TNHH Thương mại Dịch Vụ Công Nghệ HTH

HTH TECHNOLOGY CO., LTD, Công Ty TNHH Thương mại Dịch Vụ Công Nghệ HTH

HTH TECHNOLOGY CO., LTD, Công Ty TNHH Thương mại Dịch Vụ Công Nghệ HTH

8:00 am - 5:00 pm